siteverNEW

Cone Bushing

Review this Product

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Product Details

  • Cone shape for minimum resistance and maximum lean
  • 16mm/0.62″ tall
  • 25mm/0.975″ wide at the wide end
  • 19.5mm/0.75″ wide at the narrow end
  • Available in X-Type (86A Orange), F-Type (90A Red), R-Type (93A Green) and H-Type (96A Grey)
  • Pack contains two bushings with a sticker

If you want lots of turn with minimal resistance, choose Sabre Cone bushings.

A smaller volume of urethane means that these bushings lean and turn a lot more than Barrels or Kingcones, especially at softer duros.

16mm/0.62″ tall and 25mm/0.975″at the wide end, they can be run boardside or roadside in all our trucks.

Hand poured from our own original formula in the USA.

Use the table below to select the correct durometer:

– Cruising and Carving

Skater weight Durometer
50 – 100 lbs / 23-46kgs 65A-80A
75 – 125 lbs / 35-57kgs 80A-85A
100 – 145 lbs / 46-66 kgs 85A-88A
125 – 175 lbs / 57-80 kgs 87A-91A
145 – 195 lbs / 66-89 kgs 88A-94A
175 – 220+ lbs / 80-100+ kgs 91A-97A

– Freeride

Skater weight Durometer
50 – 100 lbs / 23-46kgs 68A-80A
75 – 125 lbs / 35-57kgs 80A-85A
100 – 145 lbs / 46-66 kgs 84A-88A
125 – 175 lbs / 57-80 kgs 86A-92A
145 – 195 lbs / 66-89 kgs 90A-95A
175 – 220+ lbs / 80-100+ kgs 93A-98A

– Downhill & TopSpeed

Skater weight Durometer
50 – 100 lbs / 23-46kgs 68A-80A
75 – 125 lbs / 35-57kgs 80A-85A
100 – 145 lbs / 46-66 kgs 85A-88A
125 – 175 lbs / 57-80 kgs 88A-93A
145 – 195 lbs / 66-89 kgs 90A-96A
175 – 220+ lbs / 80-100+ kgs 94A-100A

 

For loads more additional info on how to choose bushings and dial in your trucks for the perfect ride, check out our longboard bushing and truck setup guide.